The unique heated book and paper press BBP A3 is designed to flatten stacks of paper up to A3 or single books into a similar format. Two pressing plates are placed in the support frame. The height of the upper pressing plates is set by a shaft drive with a hand wheel. The maximum distance between two pressing plates is 230 mm. The lower compression plate rests on the base, which is connected to the frame structure using pneumatic bellows. The plate guide pins are anti-rotation and do not use bellows, and are directly mounted on four supports. When the lifting function is activated, the press plate is raised up to 40 mm and pressed against the top plate. Both press plates are heated by separately controlled electric heating plates to a temperature of approximately 50 °C.
Material code | Description | Package |
BBP-A3 | Heated press BBP-A3 | 1 pc. |
Technical data:
Press weight | 140 Kg | ||
Width | 600 mm | ||
Depth | 600 mm | ||
Height (press plate closed) | 1410 mm | ||
Height (press plate open) | 1640 mm | ||
Working height | 850 mm | ||
Maximum height of open panels | 230 mm | ||
Maximum. Depth suspension lower compression plate pneumatic control | 40 mm | ||
Pressure capacity 2 bar (g) (minimum pressure) | 6.0 kN | ||
Pressure capacity 3 bar (g) (normal pressure)) | 8.7 kN | ||
Pressure power 4 bar (g) (maximum pressure) | 11.6 kN | ||
Operating temperature of press plates | 50 "ƒ | ||
Heating power (per plate) | 700 W | ||
Operating resources | |||
Compressed air supply (not included) | 4-10 bar | ||
Compressed air volume (4 bar (g) per full stroke) | 5 NI | ||
Compressed air connection with hose and coupling plug | 2 years | ||
Nominal voltage of power sockets | 230 V | ||
Frequency | 50 Hz | ||
Nominal ends | 2.2 kW | ||
EN 
LT 
LV 
EE